{"product_id":"walnut-coffee-filter-holder","title":"Walnut Coffee Filter Holder with Metal Frame","description":"\u003ch2\u003eWhy it exists\u003c\/h2\u003e\n\u003cp\u003eCone filters do not store themselves well. Left loose on a counter or tossed in a camp bin, they flatten, scatter, pick up dust, and the one you grab is creased so it will not seat in the dripper. This holder fixes that with a walnut base and a thin metal wire frame that keeps a stack of 01 and 02 cone papers upright, clean, and within reach, so the next filter is ready whether you brew at home, in a cabin, or at a van or camp table. You get the stand only; paper filters are sold separately.\u003c\/p\u003e\n\u003ch2\u003eHow it works\u003c\/h2\u003e\n\u003cp\u003eSet the holder next to your dripper and kettle. Open a sleeve of 01 or 02 cone filters, square the stack, and drop it into the wire frame so the papers stand on the walnut base with the frame supporting the cone. The frame holds about 40 filters (maker's figure). When you brew, pull one filter from the front, fold the seam, seat it in your 60-degree cone dripper, rinse if that is your habit, and pour. The stack stays upright behind it, and each paper comes off flat and uncreased instead of fished out of the bottom of a bin.\u003c\/p\u003e\n\u003cp\u003eIt suits any pour-over routine built around a cone dripper: a single morning cup with an 01, or an 02 when you are brewing for more than yourself. At camp, it lives on the table beside the grinder; in a van, it rides in the kitchen drawer and comes out with the dripper. It pairs directly with our unbleached 01 and 02 cone filters.\u003c\/p\u003e\n\u003ch2\u003eBuilt for the trail\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWalnut wood base gives the stand a flat, steady footing so the stack does not tip on a counter or a camp table.\u003c\/li\u003e\n\u003cli\u003eThin brass-tone metal wire frame supports the cone shape without hiding it, so you can see how many filters are left.\u003c\/li\u003e\n\u003cli\u003eHolds about 40 cone filters (maker's figure), roughly a sleeve at a time.\u003c\/li\u003e\n\u003cli\u003eFits 01 and 02 cone-shaped (V-style) paper filters, the two cone sizes we stock.\u003c\/li\u003e\n\u003cli\u003eKeeps filters upright and off the surface, so they stay flat, clean, and ready to seat in the dripper.\u003c\/li\u003e\n\u003cli\u003eSmall footprint for a home brew bar, a cabin counter, or a van galley shelf.\u003c\/li\u003e\n\u003cli\u003eHolder only; it works with the cone filters you already use and with our unbleached 01 and 02 cones.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBest for\u003c\/h2\u003e\n\u003cp\u003ePour-over brewers with a home, cabin, or van coffee station who brew with a 60-degree cone dripper and are tired of creased, dusty filters. It is a natural gift for a coffee lover who camps, especially paired with a sleeve of 01 or 02 filters. It is not for you if your dripper takes flat-bottom basket filters or flat round discs, because the frame is shaped for cones and will not hold those. Backpackers counting grams should leave it at base camp; it is a counter piece, not a trail item.\u003c\/p\u003e\n\u003ch2\u003eHonest limits\u003c\/h2\u003e\n\u003cp\u003eThis is a display-and-storage stand, not a container: the filters are open to the air, so it belongs on a counter or table rather than in a dusty truck bed or a wet camp box. The walnut base is wood, so wipe it with a dry cloth and keep it away from standing water and kettle spills. The 40-filter capacity is the maker's figure and depends on how tightly the sleeve is packed. No filters are included.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e \u003cth\u003eDetail\u003c\/th\u003e \u003c\/tr\u003e \u003c\/thead\u003e \u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e \u003ctd\u003eWalnut wood base with a thin brass-tone metal wire frame\u003c\/td\u003e \u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCapacity\u003c\/td\u003e \u003ctd\u003eAbout 40 cone filters (maker's figure)\u003c\/td\u003e \u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhat's in the box\u003c\/td\u003e \u003ctd\u003eThe holder only; filters not included\u003c\/td\u003e \u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorks with\u003c\/td\u003e \u003ctd\u003eCone-shaped (V-style) paper filters, size 01 and 02, for 60-degree cone drippers; does not fit flat-bottom basket filters or flat round filters\u003c\/td\u003e \u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCare\u003c\/td\u003e \u003ctd\u003eWipe the base with a dry cloth; keep it away from standing water\u003c\/td\u003e \u003c\/tr\u003e\n\u003c\/tbody\u003e \u003c\/table\u003e\n\u003ch2\u003eWhat's covered\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e30-day returns for unused items in original packaging; anything that arrives defective or damaged is replaced.\u003c\/li\u003e\n\u003cli\u003eFree shipping on every order.\u003c\/li\u003e\n\u003c\/ul\u003e ","brand":"Ridgebrew","offers":[{"title":"Default Title","offer_id":67103833555185,"sku":"RB-WALNUT-COFFEE-FILTER-HOL-1","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/7114\/1361\/files\/rb_hero_walnut-coffee-filter-holder.png?v=1790788953","url":"https:\/\/ridgebrew.com\/it\/products\/walnut-coffee-filter-holder","provider":"Ridgebrew","version":"1.0","type":"link"}